---

About this item

• Dual Clamp Plate Design: Unlike common direct-screw designs, two built-in metal plates contact the tree pole from opposite sides while four wing bolts move the plates inward; The wider contact area helps distribute clamping force more evenly and makes pole alignment easier during setup
• Check Two Measurements Before Ordering: Fits artificial Christmas tree center poles up to 1.38" in diameter; The opening in your existing tree stand must also be at least 0.75" wide to accept the lower extension pole; Measure both areas before purchase
• Add Height to Your Existing Tree: The 14.8" extension pole raises the mounting position of an artificial Christmas tree, helping create a taller overall display without replacing the tree or stand; Actual visible height added varies depending on insertion depth
• Metal Construction for Seasonal Use: Made with a metal extension tube, built-in clamp plates, and four hand-tightened wing bolts; The dark green finish blends naturally with artificial tree branches and traditional green tree stands
• Tool-Free Four-Bolt Adjustment: Insert the lower pole into your existing stand, place the tree center pole between the two clamp plates, center the pole by hand, then tighten the four wing bolts gradually from both sides; Tighten opposite sides in turns for easier alignment

Add extra height to an existing artificial Christmas tree with this 14.8" metal Christmas tree height extender.

Instead of relying on screws pressing directly against the tree pole, the upper sleeve uses two built-in clamp plates operated by four wing bolts. As the bolts are tightened from both sides, the plates move inward around the center pole, creating a wider contact area and helping distribute clamping force more evenly.

Before ordering, check both connection points. The artificial tree center pole must be no larger than 1.38" in diameter, and the opening in the existing tree stand must be at least 0.75" wide to accept the lower extension pole. Tree stand is not included.

Installation requires no additional tools. Insert the lower extension pole into the existing stand, place the tree pole between the two inner clamp plates, manually center the pole, and gradually tighten the four wing bolts from alternating sides.

The extender measures 14.8" in overall length. Actual visible height added will vary depending on how far the lower pole enters the stand and how far the tree pole enters the upper sleeve.

Made with a dark green metal body, dual inner clamp plates, and four wing bolts, this extender offers a practical way to raise an existing artificial Christmas tree and create a taller holiday display without replacing the entire tree.